top of page

Support Group

Public·75 members
Adrian Wright
Adrian Wright

Bit The Floor [BETTER]


One of the men says, "Hit the floor, lady," and she does: quarters fly everywhere. The men bust up laughing and they help Karen collect her winnings. One of the men explains that he meant for her to select her floor. They help her collect her quarters and the elevator arrives at her floor. She leaves embarrassed, and the men are still laughing.




Bit The Floor



  • When the doors don't close quickly enough to suit him, the man gruffly commands the woman to "hit four" (his floor, presumably), an instruction she hears as "hit the floor." Or he tells her to "hit the floor," meaning "press the button for the floor you want." Or in the versions where a dog is present, he commands the excited animal to "Sit, Lady!," an instruction the frightened woman immediately complies with.



"There's a story I was on an elevator with 10 bodyguards. An old lady was there. One bodyguard said, 'Hit the floor,' as in 'press the button.' The old lady got scared and dropped to the floor. And we were so embarrassed, and we helped her up, and sent her flowers and paid her hotel bill, and it never happened! Here's the clincher: Whenever I go, 'No, it never happened,' they always say, 'Yes, it did. My cousin was there.'"


In the Newhart skit, there's no elevator, a key element in every extant version of the legend. Also, although "Sit, lady!" and "Hit the floor!" versions abound, no "Sit, Whitey!" versions have surfaced in oral or written form. Had the Newhart skit truly been what sparked this legend, one would expect to find at least a couple of early tellings which feature this line.


During a temporary shutdown of operations at a large plant, trained police dogs were hired to protect the building from vandalism. A company executive who was unaware of the new regime arrived at the plant early one morning. As he was walking down the corridor to his office, he came face to face with one of the dogs, accompanied by his trainer. The dog reacted to the presence of the stranger by baring his teeth and uttering a menacing growl. The executive froze to the spot. The trainer shouted in an authoritative tone the command: "Sit!" Whereupon, the unnerved executive promptly sat down on the floor.


On the floor today is legislation sponsored by Rep. Ann Wagner (R-Mo.) aimed at GOP concerns about infants who survive an attempted abortion. It would require health care providers to care for a child who survived an attempted abortion, a situation that is exceedingly rare. Medical providers could face up to five years in prison under the bill. The protection is already codified by a 2002 bipartisan law that solidified that infants have the rights of a full human.


Unlike most square profile tongue and groove router bits, our matched V-Tongue & Groove set produces an elegant 45 "V" groove in stock from 5/8" to 7/8" thick. This type of joint is ideal for custom flooring, wainscot paneling, cabinet backs, and even Shaker-style cabinet doors. Both router bits feature bearing guides that will make setting-up and running quick and easy. Features a 1/4" thick tongue and groove joint.


This matched Flooring Router Bit Set is great for making hardwood flooring with stock up to 1-1/8" thick. The tongue cutter features a 1/2 angle which produces a slight gap at the bottom of the joint to ensure a tight-fitting joint. The tongue and groove cuts are also approximately 1/16" offset to allow room for expansion.


For working with stock up to 3/4" thick, the tongue cutter on this router bit set features a special nail slot profile for professional results. The rounded profile at the bottom of the joint prevents debris on the floor from getting in the way of a nice tight fit. Both bits feature a high quality bearing for ease of setup while the tongue and groove cuts are approximately 1/16" offset to allow room for expansion.


Cut tongue and groove flooring from stock up to 31/32" thick. This hardwood floor router bit set also has added features such as a hidden brad nail head ridge as well as a rounded tongue cutter for easy flooring assembly especially in tight spaces.


Let the zombies hit the floor is a challenge in Dead Island. It requires the Hero to kill a certain amount of Floaters, the amount depending on the challenge level. The easiest way to complete this challenge is just to travel around the Jungle and Laboratory area, as they're most commonplace around there. The Sewers also has a Floater population, so it's possible to just keep roaming down there for Floaters if you haven't got the other areas unlocked yet.


* Please call us with any questions about our bit floor scraper sds max shank rentals in Amarillo, Dalhart, Canyon, Pandhandle and Fritch, TX as well as the Texas and Oklahoma Panhandles.


Your garage floor coating needs to be able to penetrate and bond to the concrete in order to adhere properly. Most concrete floors are finished to provide a smooth and even surface. Even new floors need to be prepped for installation. Doing this reduces the porosity of the concrete, and therefore, the coatings cannot penetrate and soak into the surface well. Proper prep and concrete grinding are as important as the product you use.


Once the concrete is properly prepped, the floor coating can penetrate into the concrete surface, giving it a better bond, and lasting longer. Not prepping correctly is the number one reason garage floor coatings peel up after installation.


If you are looking to refinish your concrete garage floor, you may be wondering if diamond bit grinding is a better option than acid etching. Both methods have their pros and cons, but in general, diamond bit grinding is the better option. Below, we will discuss the reasons why diamond bit grinding is a better choice for concrete garage floors.


Acid etching concrete floors can cause a number of different types of damage. The acid can eat away at the concrete, causing it to become pitted and rough. It can also cause the concrete to discolor, making it appear dull and lackluster. In addition, acid etching can also damage any sealant that has been applied to the concrete, making it more susceptible to staining and wear. For these reasons, it is important to be careful when using acid to etch concrete and to make sure that the area is well ventilated.


The issue with prepping your garage floor with grinding is that it is not always feasible for you to find the appropriate equipment, especially the garage floor grinder to properly diamond grind garage floor. There is also dust control, and gouging of the surface if you are inexperienced at using the equipment.


Always make sure when you are looking to hire a floor coating company that you make sure they grind the concrete. Any contractor that wants to acid etch your floor is just cutting corners to reduce costs, and your floor will not stand the test of time.


FoX Decking Keys are designed to assemble deck components with a flexible connection. Since the decking is not attached to the underlying structure it is essential that the subfloor is solid and rigid, e.g. concrete patio, pavers, black top (asphalt), flat field stone walkways, etc. The system should not be used on soft or unstable ground such as grass, sand, topsoil, etc. 041b061a72


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page